Birch flooring: two looks, same premium quality

Discover how variation and the V+ option transform the natural character of oak to suit your decor.

Birch stands out for its natural warmth and delicate grain. Its reddish-brown heartwood contrasts beautifully with the paler sapwood, creating a rich, lively palette that deepens over time and exposure to light.

With its fine, even texture, birch offers a naturally lustrous and elegant look. Valued for its visual softness and stability, birch complements both classic and contemporary spaces.

Variation

Birch Variation highlights a range of natural tones, from rosy blond to golden brown, with grain patterns that may subtly vary between boards. This mix of colors and textures creates visual richness and depth, bringing out the full character of the species.

NATURAL COLOR

All color variations are accepted in this appearance.

KNOTS

No healthy knots accepted. Small open knots and holes may be accepted, but they must be filled.

CRACKS AND SPLITS

Not accepted.

MINERAL STREAKS

Small streaks up to 150 mm (6 in.) are accepted.

MARKS AND CHECKS

Accepted.

OTHER CHARACTERISTICS

Slight color abnormalities are accepted (ex.: tool marks, sticker stains, discolouration, blue stains, etc.).

(*) In the hardwood flooring industry, there is an accepted allowance of up to 5% for pieces that may be misgraded or off-grade. This means that while the vast majority of the flooring will meet our high-quality manufacturing standards, it is possible to find a small percentage of pieces with imperfections or defects. This allowance is standard across the industry and ensures that any minor variations in grading are within an acceptable range.

Wood is a natural, noble material. Each board is unique and may display variations in color, grain, and natural characteristics consistent with the selected grade.

Variations from box to box are therefore expected and are an inherent part of the product’s authenticity. They do not constitute manufacturing defects.

To ensure a balanced and harmonious distribution of natural variation, Preverco strongly recommends opening and blending a minimum of 3 to 5 boxes simultaneously during installation. This practice allows tonal differences, contrasts, and natural features to be evenly distributed across the installed surface.

When installation is performed by a third party, it is recommended that the homeowner:

attend the installation when possible, and/or
clearly communicate aesthetic expectations prior to the start of installation.

Natural characteristics may be positioned strategically depending on the desired visual outcome.

For example:

If a more uniform and understated look is desired, boards with more pronounced knots or stronger contrast may be installed in closets, cuts, or less visible areas.
Conversely, if a more rustic and expressive ambiance is preferred, these features may be prioritized in open living spaces.

Any board deemed ‘’less desired’’ should be set aside prior to installation. Once installed, it is considered accepted.

Proper planning and clear communication are essential to achieving a final result aligned with aesthetic expectations.

Final Result

/ 12

Variation with Knots (V+)

Birch Variation with Knots reveals a warmer, more rustic personality. Color contrasts are more pronounced, and the presence of small knots adds relief and authenticity. This appearance captures the wood’s organic vitality — perfect for creating inviting, nature-inspired spaces.

NATURAL COLOR

All color variations are possible.

KNOTS

1) Healthy or star knots of maximal dimensions accepted.** 2) For other defects, repair material surface up to 4 square inches (25cm²). **For information purposes, the size of knots, holes, and open knots may reach up to 60% of the board width, to a maximum of 4 inches for 7-1/8" and 9" widths.

CRACKS AND SPLITS

Accepted

MINERAL STREAKS

Accepted

MARKS AND CHECKS

Small, repaired marks and checks in the compression around knots, less than 40 mm (1 1/2 in) in length, limited in number.

OTHER CHARACTERISTICS

Slight abnormal color variations accepted (e.g. tool marks, stains on slats, discoloration, bluing, etc.)

(*): In the hardwood flooring industry, there is an accepted allowance of up to 5% for pieces that may be misgraded or off-grade. This means that while the vast majority of the flooring will meet our high-quality manufacturing standards, it is possible to find a small percentage of pieces with imperfections or defects. This allowance is standard across the industry and ensures that any minor variations in grading are within an acceptable range.