White oak flooring: three looks, same premium quality
Discover how nuance, variation and the V+ option transform the natural character of oak to suit your decor.
White Oak is prized for its timeless elegance and exceptional visual modernity. Its finely textured grain gives it a noble and balanced appearance.
Natural tones ranging from pale beige to golden brown bring warmth and refinement to any environment. Its understated, distinguished character makes it ideal for both classic and contemporary interiors.
Nuance
White Oak Nuance features a uniform and elegant look, with fine, delicately drawn grain. Boards are selected for their consistency and soft tonal balance, resulting in a bright, soothing surface marked by purity and finesse.
NATURAL COLOR
All color variations are possible.
PRESENCE OF KNOTS
Healthy and/or repaired knots are occasionally permitted up to 3/16" in diameter.
CRACKS AND SPLITS
Open splits are not permitted on the face or at the ends of the board. **
MINERAL STREAKS
Small streaks accepted up to 102 mm (4 in)
MARKS AND CHECKS
Certain oak species may naturally exhibit surface checks. A maximum of 3/4" of surface checking is permitted per linear foot of board. Checks must be stabilized, show no risk of propagation, and be fully covered by the finish. Checks are not permitted at board ends.
OTHER CHARACTERISTICS
Slight abnormal color variations accepted (e.g. tool marks, stains on slats, discoloration, bluing, etc.) Open defects must be repaired whenever possible. When repair is not possible, open defects at the center of the face must be smaller than 1/16" in diameter or equivalent. Open defects reaching the edge at the V-joint must also be smaller than 1/16". Warning: Wood is a natural, living material. White oak is a species that may display slight color variations, checks, cracks, or mineral streaks. Please familiarize yourself with the possible natural variations.
(*) In the hardwood flooring industry, there is an accepted allowance of up to 5% for planks that may be misgraded or off-grade. This means that while the vast majority of the flooring will meet our high-quality manufacturing standards, it is possible to find a small percentage of pieces with imperfections or defects. This allowance is standard across the industry and ensures that any minor variations in grading are within an acceptable range.
(**) It is important to note that White Oak may be susceptible to checking, surface cracks, and splitting when exposed to environments where conditions such as humidity levels, temperature fluctuations, and inadequate airflow are not maintained within recommended ranges. These occurrences are natural characteristics of wood and are not the result of a manufacturing defect. Consequently, they are not covered under warranty.
Final Result
Variation
White Oak Variation reveals the subtle diversity of the species, tones and textures. Boards range from golden blond to mid brown, with gently flowing grain lines. This appearance achieves a refined harmony between natural expression and sophistication.
NATURAL COLOR
All color variations are accepted in this appearance.
KNOTS
Healthy and/or repaired knots are occasionally permitted up to 3/16" in diameter.
CRACKS AND SPLITS
Open splits are not permitted on the face or at the ends of the board.. **
MINERAL STREAKS
Accepted.
MARKS AND CHECKS
Certain oak species may naturally exhibit surface checks. A maximum of 3/4" of surface checking is permitted per linear foot of board. Checks must be stabilized, show no risk of propagation, and be fully covered by the finish. Checks are not permitted at board ends.
OTHER CHARACTERISTICS
Slight color abnormalities are accepted (e.g. tool marks, sticker stains, discoloration, bluing, etc.). Open defects must be repaired whenever possible. When repair is not possible, open defects at the center of the face must be smaller than 1/16" in diameter or equivalent. Open defects reaching the edge at the V-joint must also be smaller than 1/16". Warning: Wood is a natural, living material. White oak is a species that may display slight color variations, checks, cracks, or mineral streaks. Please familiarize yourself with the possible natural variations.
(*) In the hardwood flooring industry, there is an accepted allowance of up to 5% for planks that may be misgraded or off-grade. This means that while the vast majority of the flooring will meet our high-quality manufacturing standards, it is possible to find a small percentage of pieces with imperfections or defects. This allowance is standard across the industry and ensures that any minor variations in grading are within an acceptable range.
(**) It is important to note that White Oak may be susceptible to checking, surface cracks, and splitting when exposed to environments where conditions such as humidity levels, temperature fluctuations, and inadequate airflow are not maintained within recommended ranges. These occurrences are natural characteristics of wood and are not the result of a manufacturing defect. Consequently, they are not covered under warranty.
Final Result
Variation with Knots (V+)
White Oak Variation with Knots showcases the organic richness and depth of the wood. More visible contrasts and natural knots highlight its authentic character. This warm, textured appearance adds soul and personality to any space.
NATURAL COLOR
All color variations are possible.
KNOTS
Healthy or star knots of maximum allowable size are permitted.**
CRACKS AND SPLITS
Open splits are not permitted on the face or at the ends of the board. ***
MINERAL STREAKS
Accepted
MARKS AND CHECKS
Certain oak species may naturally exhibit surface checks. A maximum of 3/4" of surface checking is permitted per linear foot of board. Checks must be stabilized, show no risk of propagation, and be fully covered by the finish. Checks are not permitted at board ends.
VISUAL CHARACTERISTICS AROUND KNOTS
Visual characteristics may be present around knots. They must be properly repaired. Their cumulative length must be less than 2.5", and no individual characteristic may exceed 1.75".
OTHER CHARACTERISTICS
Slight abnormal color variations accepted (e.g. tool marks, stains on slats, discoloration, bluing, etc.) Open defects must be repaired whenever possible. When repair is not possible, open defects at the center of the face must be smaller than 3/16" in diameter or equivalent. Open defects reaching the edge at the V-joint must be smaller than 1/16". For other defects, the surface area of repair material may not exceed 25 cm² (4 square inches). Warning: Wood is a natural, living material. White oak is a species that may display slight color variations, checks, cracks, or mineral streaks. Please familiarize yourself with the possible natural variations.
(*) In the hardwood flooring industry, there is an accepted allowance of up to 5% for planks that may be misgraded or off-grade. This means that while the vast majority of the flooring will meet our high-quality manufacturing standards, it is possible to find a small percentage of pieces with imperfections or defects. This allowance is standard across the industry and ensures that any minor variations in grading are within an acceptable range.
(**) For reference, the size of knots, holes, and open knots may reach up to 60% of the board width, to a maximum knot diameter of 4″.
(***) It is important to note that White Oak may be susceptible to checking, surface cracks, and splitting when exposed to environments where conditions such as humidity levels, temperature fluctuations, and inadequate airflow are not maintained within recommended ranges. These occurrences are natural characteristics of wood and are not the result of a manufacturing defect. Consequently, they are not covered under warranty.
Final Result
